User's Manual

Chapter 7 Static Route 63
Table 34 Network
Setting > Routing > DNS Route: Add/Edit
LABEL DESCRIPTION
Domain Name Enter the domain name you want to resolve.
You can use the wildcard character, an “*” (aste
risk) as the left most part of a domain
name, such as *.example.com. The Router forwards DNS queries for any domain name
ending in example.com to the WAN interface specified in this route.
IP Subnet Mask Enter the subnet mask of the network for which to use the DNS route.
Interface Select a WAN interface through which the matched DNS query is sent. You must have
the W
AN interface(s) already configured in the WAN screen.
7.4 The Current Route Screen
Use the Current Route screen to view a table of the current static and dynamic routes on the
Router. Click Network Setting > Routing > Current Route.
Figure 43 Network Setting
> Routing > Current Route
Table 35 Network Setting > Routing > Current Route
LABEL DESCRIPTION
Destination IP This is the IP network address of the final destination.
Gateway This is the IP address of the gateway.
Subnet Mask This is the IP network subnet mask of the final destination.
Interface This is the WAN interface through which the matched traffic is routed.