User's Manual

Chapter 5 Wireless 5GHz 46
Click Network
Setting > Wireless 5GHz > WPS. Select Enable and click Apply to activate the WPS
function. Then you can configure the WPS settings in this screen.
Figure 28 Network Setting
> Wireless 5GHz > WPS
Table 20 Network Setting > Wireless 5GHz > WPS
LABEL DESCRIPTION
Enabled WPS Select Enab
le and click Apply to activate WPS on the Router.
WPS PBC Click this to initiate push button configuration.
Use PBC on each WPS-enabled device,
and allow them to connect automatically.
WPS Station PIN Add a client to the wireless network by entering the client’s Personal Identification
Number (PIN) in the field and clicking the Add Enrollee button.
Note: You must also activate WPS on the client within two minutes.
WPS AP PIN Add a client by entering the AP’s PIN from this field in the client’s WPS configuration.
Click Generate New PIN to refresh it.