User's Manual

Chapter 4 Wireless 2.4GHz 42
4.8 Advanced Screen
Use the Advanced screen to configure advanced wireless settings. Click Network Setting >
Wireless 2.4GHz > Advanced.
Figure 25 Network Setting
> Wireless 2.4GHz > Advanced
Table 17 Network Setting > Wireless 2.4GHz > Advanced
LABEL DESCRIPTION
Fragmentation
Thr
eshold
Enter the maximum data fragment size that can be sent.
Output Power Set the output power of the Router. If there is a high density of APs in an area, decrease
the output power to reduce interference with other APs.
Preamble Select a preamble type from the drop-down list menu.
802.11 Mode Select 80
2.11b to allow only IEEE 802.11b compliant WLAN devices to associate with the
Router.
Select 80
2.11g to allow only IEEE 802.11g compliant WLAN devices to associate with the
Router.
Select 80
2.11b+g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices
to associate with the Router. The transmission rate of your Router might be reduced.
Select 80
2.11n to allow only IEEE 802.11n compliant WLAN devices to associate with the
Router.
Select 80
2.11g+n to allow either IEEE 802.11g or IEEE 802.11n compliant WLAN devices
to associate with the Router. The transmission rate of the Router might be reduced
when an 802.11g wireless client is associated with it.
Select 80
2.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or IEEE 802.11n compliant
WLAN devices to associate with the Router. The transmission rate of the Router might
be reduced when an 802.11b or 802.11g wireless client is associated with it.
Note: The transmission rate varies depending on the mode the wir
eless client uses to
associate with the Router.
Channel Width Select the wireless channel width that the Router uses.