User's Manual

Chapter 4 Wireless 2.4GHz 29
Table 6 Net
work Setting > Wireless 2.4GHz > General
LABEL DESCRIPTION
Wireless Select the Enable Wireless LAN check box to activate the wireless LAN.
Wireless
Network Name
(
SSID)
Enter a descriptive name for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the ou
tgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Client
Isolation
Select this to keep the wireless clients in this SSID from communicating with each other
directly through the Router.
MBSSID/
LAN
Iso
lation
Select this to keep the wireless clients in this SSID from communicating with clients in
other SSIDs or wired LAN devices through the Router.
Select both Cl
ient Isolation and MBSSID/LAN Isolation to allow this SSID’s wireless
clients to only connect to the Internet through the Router.
Channel
Selection
Set the channel depending on your particular region.
Select a channel or use Auto to have the Router automatically determine a channel to
use. If you are having problems with wireless interference, changing the channel may
help. Try to use a channel that is as many channels away from any channels used by
neighboring APs as possible. The channel number which the Router is currently using
then displays in the Operating Channel field.
Scan Click this button to have the Router immediately s
can for and select a channel (which is
not used by another device) whenever the device reboots or the wireless setting is
changed.
Result Click this to show the scan result of channels and
their noise such as the following
screen.