User's Manual

Chapter 23 Remote Management 140
Click Main
tenance > Remote MGMT > SSH tab to display the screen as shown.
Figure 102 Ma
intenance > Remote MGMT > SSH
Table 86 Maintenance > Remote MGMT > SSH
LABEL DESCRIPTION
Server Port This displays the service port
number for accessing the Router. If the number is grayed
out, it is not editable.
Server Access Select the interfaces through which a compu
ter may access the Router using this
service.
Note: It is recommended if you are allowing WAN access even temporarily to change
the default passwor
d (in Maintenance > User Account). To allow access from
the WAN, you will need to configure a WAN to Router firewall rule.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Router using this service.
Select Al
l to allow any computer to access the Router using this service.
Choose Ra
nge to just allow the computers with an IP address in the range that you
specify to access the Router using this service.