User's Manual

Chapter 11 Firewall 83
11.2.1 Rules Edit Screen
Use this screen to configure firewall rules. In the Rules screen, select an index number and click a
rule’s Edit icon.
Figure 58 Firewall > Rules: Edit
Table 49 Firewall > Rules: Edit
LABEL DESCRIPTION
Active Select this option to enable this firewall rule.
Rule Name If you want to select an exiting service, choose Select a Serv
ice and find the service
to which this rule applies to in the drop-down list box.
If you want to manually configure a servi
ce that is not in the list, choose Custom
Service. Enter the name of the service and select its protocol in the Protocol field.
If you select ICMP as your protocol, select the ICMP type in the ICMP (Type-code)
field below.
Source IP Address Enter the source IP address.
Source Subnet Mask Enter the source subnet mask.
Source Port Enter a single source port or a port range.
Destination IP
Addr
ess
Enter the destination IP address.
Destination Subnet
Mask
Enter the destination subnet mask.