User's Manual

Chapter 10 Filter 78
Source IP Address Enter the source IP address of the packets you wish to filter.
Source Prefix Length Enter the prefix length for the source IPv6 address.
Destination IPv6 Address Enter the destination IPv6 address of the packets you wish to filter.
Destination Prefix Length Enter the prefix length for the destination IPv6 address.
ICMPv6 Type Select one of the ICMPv6 message types to filter.
Protocol This is the (upper layer) protocol that def
i
nes the service to which this rule
applies. By default it is ICMPv6.
Source MAC Address This field is only available when you select MAC in the Ru
le Type field.
Enter the MAC address of the packets you wish to filter.
IPv6 / MAC Filter Rule Index Select the index number of the filter set.
Active This field shows whether the rule is activated.
Interface This field shows the interface to which the filter rule applies.
Direction The filter rule applies to this traffic direction.
ICMPv6Type This is the ICMPv6 message type to filter.
Src IP/Prefix length This is the source IPv6 address and prefix length.
Dest IP/Prefix length This displays the destination IPv6 address and prefix length.
MAC Address This is the MAC address of the packets being filtered.
Protocol This is the (upper layer) protocol that def
i
nes the service to which this rule
applies.
Table 45 Security > Filter > IPv6/MAC Filter (continued)
LABEL DESCRIPTION