User's Manual
Table Of Contents
- HGW-2501GN-R2 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- WAN
- Wireless 2.4GHz
- LAN
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- VoIP
- System Monitor
- User Account
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Troubleshooting
- Safety Warnings
- New Bookmark
Chapter 7 Quality of Service (QoS) 60
Click Network Setting > QoS > Class Setup to open the following screen.
Figure 42 Network Setting > QoS > Class Setup
Table 34 Network Setting > QoS > Class Setup
LABEL DESCRIPTION
Add new Classifier Click this to create a new classifier.
Order This is the order of the classifier.
Index This is the index number of the classifier.
Status This indicates whether the classifier is active or not.
A yellow bulb signifies that this classifier is active. A
gray bulb signifies that this
classifier is not active.
From Interface If the classifier applies to traffic coming in through a specific interface, it displays
here.
Classification
Criteria
This shows criteria specified in this classifier, for example the interface from which
traffic of this class should come and the source MAC address of traffic that matches
this classifier.
DSCP (Traffic Class)
Mark
This is the DSCP number added to traffic of this classifier.
802.1P/1Q Mark This is the IEEE 802.1p priority level assigned to traffic of this classifier.
To Queue This is the name of the queue in which traffic of this classifier is put.
Modify Click the Edit icon to edi
t the classifier.
Click the Delete icon to delete an existing classifier. Note that subsequent rules
move up by one when you take this action.