User's Manual
Table Of Contents
- HGW-2501GN-R2 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- WAN
- Wireless 2.4GHz
- LAN
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- VoIP
- System Monitor
- User Account
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Troubleshooting
- Safety Warnings
- New Bookmark
Chapter 6 Static Route 53
6.1.1 Add/Edit Static Route
Click Add New Static Route in the Static Route screen or click the Edit icon next to a rule. Use this
screen to configure a static route.
Figure 33 Routing > Static Route: Add/Edit
Table 25 Routing > Static Route: Add/Edit
LABEL DESCRIPTION
Destination IP
Address
Enter the IP network address of the final destination.
IP Subnet Mask Enter the IP subnet mask.
Gateway IP
Addr
ess
Enter the IP address of the next-hop gateway which helps forward packets to their
destinations.
Metric Enter the “cost” of transmission for routing purposes. IP routing uses hop count as the
measurement of cost, with a minimum of 1 for directly-connected networks.
6.2 IPv6 Static Route
Use the IPv6 Static Route screen to view the IPv6 static route rules. Click Network Setting >
Routing > IPv6 Static Route.
Figure 34 Network Setting > Routing > IPv6 Static Route