User's Manual
Table Of Contents
- HGW-2501GN-R2 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- WAN
- Wireless 2.4GHz
- LAN
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- VoIP
- System Monitor
- User Account
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Troubleshooting
- Safety Warnings
- New Bookmark
Chapter 22 Remote Management 128
Use this screen to specify which interfaces allow FTP access and from which IP address the access
can come. To change your Router’s FTP settings, click Maintenance > Remote MGMT > FTP. The
screen appears as shown.
Figure 93 Maintenance > Remote MGMT > FTP
Table 77 Maintenance > Remote MGMT > FTP
LABEL DESCRIPTION
Server Port This displays the service port number for accessing the Router. If the number is grayed
out, it is not editable.
Server Access Select the interfaces through which a computer may access the Router using this
service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Router using this service.
Select Al
l to allow any computer to access the Router using this service.
Choose Range to just allow the computers with an IP address in the range that you
specify to access the Router using this service.