User's Manual
Table Of Contents
- HGW-2501GN-R2 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- WAN
- Wireless 2.4GHz
- LAN
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- VoIP
- System Monitor
- User Account
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Troubleshooting
- Safety Warnings
- New Bookmark
Chapter 21 Backup/Restore 124
Reset to Factory Defaults
Click the Reset bu
tton to clear all user-entered configuration information and return the Router to
its factory defaults. The following warning screen appears.
Figure 89 Reset Warning Message
Figure 90 Reset In Process Message
You can also press the Reset button on the back panel to reset the factory defaults of your Router.
Refer to Chapter 1 on page 7 for more information on the Reset button.
21.2 The Reboot Screen
System restart allows you to reboot the Router remotely without turning the power off. You may
need to do this if the Router hangs, for example.
Click Maintenance > Reboot. Click the Reboot button to have the Router reboot. This does not
affect the Router's configuration.