User's Manual

Table Of Contents
Chapter 21 Backup/Restore 123
Restore Configuration
Restore Configuration allows you to upload a new or pr
eviously saved configuration file from your
computer to your Router.
Table 74 Restore Configuration
LABEL DESCRIPTION
File Path Click Choose File and find the file you want to restore.
Upload Click this to begin the upload process.
Reset Click this to reset your device settings back to the fact
ory default.
Do not turn off the Router while configuration file upload is in progress.
After the Router configuration has been restored successfully, the login screen appears. Login again
to restart the Router.
The Router automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 88 Network Temporarily Disconnected
If you restore the default configuration, you may need to change the IP address of your computer to
be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, an error screen will appear. Click OK to go back to the
Configuration screen.