User's Manual

Chapter 19 Log Setting 118
Table 72 Ma
intenance > Log Setting
LABEL DESCRIPTION
Syslog Logging Select the Active check box to enable syslog logging.
Mode Select Local File to have the Rou
ter save the log file locally.
Select Local File and Remote to have the Rou
ter save the log file locally and send it to
an external syslog server.
Syslog Server IP
Address
If y
ou select Local File and Remote in the Mode field, enter the server name or IP
address of the syslog server that will log the selected categories of logs.
Syslog Server
UDP Port
If you select Local File and Remote in the Mode field, enter the port number used by
the syslog server.
SMTP
Authenti
cation
SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for the
Internet. SMTP enables you to move messages from one E-mail server to another.
Select the check box to activate SMTP authentication. If mail server au
thentication is
needed but this feature is disabled, you will not receive the E-mail logs.
Mail Server Enter the server name or the IP address of the mail server for
the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via E-
mail.
Mail Subject Type a title that you want to be in the subject line of the system log e-mail message that
the Router sends.
From Specify where the logs are sent from.
To The Router sends logs to the e-mail address speci
f
ied in this field. If this field is left
blank, the Router does not send logs via E-mail.
User Name Enter the user name (up to 32 characters) (usually the user name o
f a mail account).
Password Enter the password associated with the user name above.
Log Schedule Specify the schedule for sending log. Specify days and t
i
mes for sending logs in the
following fields.
Day For Sending
Log
Specify the day for sending log.
Time for
Sendi
ng Log
Specify the time for sending log.
Clear log after
sending mail
Select this to delete all the logs after the Router sends an E-mail of the logs.
Send Alarm to Enter the E-mail address where the alarm messages will be sent.
Alarm Interval Specify the number of seconds between the sending of alarm log e-mails.