User's Manual
Table Of Contents
- HGW-2501GN-R2 User’s Guide
- Contents
- Introduction
- Introducing the Web Configurator
- WAN
- Wireless 2.4GHz
- LAN
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS
- Filter
- Firewall
- Parental Control
- Certificates
- VoIP
- System Monitor
- User Account
- System
- Time Setting
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Troubleshooting
- Safety Warnings
- New Bookmark
18
Chapter
Chapter 18 Time Setting 115
CHAPTER 18
Chapter 18
Time Setting
18.1 The Time Setting Screen
To change your Router’s time and date, click Maintenance > Time. The screen appears as shown.
Use this screen to configure the Router’s time based on your local time zone.
Figure 81 Maintenance > Time Setting
Table 71 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time This field displays the date and time of your Router.
Manual Select this to enter the time and date manual
ly in hh:mm:ss and yyyy/mm/dd format.
Get from Time
Server
Select this to have the Router get the time automatically from a time server.
Time Server
Address 1, 2
Enter the IP address or URL (up to 31 extended ASCII characters in length) of your
time server. Check with your ISP/network administrator if you are unsure of this
information.
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).