User's Manual

Chapter 14 VoIP 101
Figure 71
SIP > SIP Service Provider > Edit (continued)
Table 61 SIP > SIP Service Provider: Edit
LABEL DESCRIPTION
SIP Service
Provider
Select this if you want the Router to use this SIP provider. Clear it if you do not want
the Router to use this SIP provider.
SIP Service
Provider Name
Enter the name of your SIP service provider.
SIP Local Port Enter the Router’s listening port number, if your VoIP service provider gave you one.
Otherwise, keep the default value.
Main SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your VoIP service
provider. You can use up to 95 printable ASCII characters. It does not matter whether
the SIP server is a proxy, redirect or register server.
SIP Server Port Enter the SIP server’s listening port number, if your VoIP service provider gave you
one. Otherwise, keep the default value.
REGISTER Server
Address
Enter the IP address or domain name of the SIP register server, if your VoIP service
provider gave you one. Otherwise, enter the same address you entered in the SIP
Server Address field. You can use up to 95 printable ASCII characters.
REGISTER Server
Port
Enter the SIP register server’s listening port number, if your VoIP service provider gave
you one. Otherwise, enter the same port number you entered in the SIP Server Port
field.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 127 printable ASCII Extended set characters.
Bound Interface
Name
If you select Any_WAN, the Router automatically activates the VoIP service when any
WAN connection is up.
If you select Mu
lti_WAN, you also need to select the pre-configured WAN connections.
The VoIP service is activated only when one of the selected WAN connections is up.