Operator`s manual

HT60D / HT70S Hedgetrimmer

Original Instructions Version Mar12

Air Filter

Before using the hedge trimmer, check the air lter

(3). Being clogged, will reduce the engine

performance.

Clean the lter element in warm, soapy water, dry

completely before installing. If the element is broken

or shrunk, replace with a new one.

Carburettor

The carburettor mixture setting has been set at the

factory and will not need adjusting.

Adjusting the idle speed, if adjustment is

necessary turn the T screw (1) clockwise (3) until the blades

start to move, then turn the screw T anticlockwise (2)

until the blades stop.

If the idle speed cannot be adjusted to stop the

blades moving at idle, contact your dealer for

repair before use.

Storage

Oil the blades to prevent rust.

Remove the spark plug, pour a small amount of 2-stroke oil into the cylinder. Rotate the crankshaft several

times using the starting rope in order to distribute the oil. Put the spark plug back in.

Remove the fuel from the machine.