Operator`s manual

HT60D / HT70S Hedgetrimmer
17
Original Instructions Version Mar12
Always wear heavy-duty gloves when handling the blades.
Blades
Check blades for damage before using the hedge trimmer.
Clean any residue from the blades using a cleaning agent.
Lubricate the blades with spray oil before and after use.
Sharpening
During the rst ten hours of work, avoid running the engine at maximum speed for a prolonged period until
all the components have bedded in. After the engine has been run in, it will reach its maximum power.
After two hours of work, check that all nuts and screws are securely fastened and tighten if necessary.
Always keep the le at an angle of 45° to the blade, and always le in the direction of the cutting edge.
Note: les cut only in one direction; lift the le from the blade when returning to start a new pass.
Remove as little material as possible.
Do not try to sharpen a damaged blade: change it or take it to a service dealer.