Operator`s manual
HT60D / HT70S Hedgetrimmer
16
Original Instructions Version Mar12
HORIZONTAL CUT:
In order to get the best cutting results, slightly tilt the blade 5 to 10° towards the cutting direction.
Cut slowly, especially when cutting thick hedges.
The hedge trimmer must only be used to trim hedges or small bushes. It is not to cut other types
of material. Do not use the hedge trimmer as a lever to lift, move or break objects.
Avoid cutting thick branches, which will damage the blades and shorten the life of the drive system.
Always keep your body to the carburettor side of your trimmer, never on the muer side.
Maintenance
IMPORTANT
After every use, check that all nuts, bolts and screws are securely fastened and tighten if necessary.
In the event of an accident, breakdown or blockage, ensure the engine is turned o before any work is
carried out to rectify this.
Make sure the engine has stopped and is cool before performing any service to the machine. Contact with
moving cutting head or hot muer may result in a personal injury.