Operator`s manual

CS45 / CS50 / CS56 Chainsaw
18
Original Instructions Version April 12
Checking the Oil Supply
After starting the engine, run the chain at medium speed
and see if chain oil is sprayed as shown in the gure.
WARNING
• This chain saw is equipped with very sharp blades, and when used incorrectly the blades can
be extremely dangerous. Improper handling can cause accidents which may in turn lead to
serious injury or death. For this reason, you should always be careful to adhere to the following
instructions when using your chain saw.
• Never hold the chain saw in a way in which the blades are pointed towards someone else.
• Never allow the blades to come into proximity with your body while the engine of the chain saw is in
operation.
• Always turn o the engine before adjusting the blades, removing branches which have become stuck in the
blades, or at any other time when coming into close proximity with the blades.
• Always wear work gloves made of leather when adjusting the chain saw.
• Always place the blade cover provided with the chain saw over the blades when not in use.
• Falling branches may fall onto the operators face or into the eyes, resulting in injuries, scratches,
and cuts, and for this reason you should always wear a helmet and face protector when using your
chain saw
Transportation
• Never transport the chain saw with the engine running. An engine that is running could be accidently
accelerated causing the blade to engage.
• Make sure the blade safety guards are in place when transporting the chain saw.
• When carrying by hand, the cutting head should be pointing backwards.
• Ensure the chain saw is secure when transporting in a vehicle and the tank is drained of fuel.