Owner`s manual

ASSEMBLY OF THE GRASS TRIMMER

The blade fitted to the guard is sharp and can cause injury, always wear gloves

INSTALLATION OF THE GUARD

• To install the guard to the shaft, locate the shield using bracket A as a locating point Fig 2, and secure

using plate B and 2 screws Fig 4.

The blade fitted to the guard is sharp and can cause injury, always wear gloves

INSTALLATION OF THE NYLON HEAD

• Hold the dust cover Fig 5 with a wrench Fig 6 to stop the shaft rotating and screw the trimmer head

clockwise onto the drive shaft until tight.

Fig 5 DRIVE SHAFT, DUST COVER

Fig 6 WRENCH

Fig 2

Fig 4 PLATE B

Fig 1 BRACKET A

Fig 2 BRACKET A

SHIELD

Fig 3