Owner`s manual

Fig 17 T screw

• If the idle speed cannot be adjusted to stop the cutting head moving at idle,

contact your dealer for repair before use.

Fig 18 SAFETY LOCK,

THROTTLE LEVER

SAFETY LOCK

• The safety lock is to prevent the throttle lever from accidentally being engaged.

• The throttle lever, Fig 18, can only be pressed in if the safety lock is held down.

• Check if the safety lock and throttle lever returns to its original position and the engine returns to idling

when you release your hand from the handle.

• Any defects contact your nearest service agent for repairs before using the machine.

STORAGE

• Remove the spark plug, pour a small amount of oil into the cylinder. Rotate the crankshaft several

times using the starting rope in order to distribute the oil. Put the spark plug back in.

• Remove the fuel from the machine.

TROUBLESHOOTING

Engine will not start, power loss.

• Check that the fuel tank is not empty. Fill with mixed fuel.

• The fuel does not reach the carburettor. Change the fuel filter in the fuel tank.

• There is water in the fuel. Drain and clean the fuel system.

• The air filter is dirty. Clean or replace the air filter.

• There are carbon deposits in the exhaust muffler restricting the engine. Clean or change the

muffler.

• Spark plug is worn. Replace spark plug.