Phone User Guide

ManualsBrandsMitel ManualsTelephoneT7100

3300 CITELlink Gateway

for 7000 Series Norstar Phones

T7100 Phone User Guide

Summary of content (20 pages)

PAGE 1
3300 CITELlink Gateway for 7000 Series Norstar Phones T7100 Phone User Guide
PAGE 2
NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by MITEL NETWORKSJ Corporation. The information is subject to change without notice and should not be construed in any way as a commitment by MITEL NETWORKS or any of its affiliates or subsidiaries. MITEL NETWORKS and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document.
PAGE 3
Contents 1 ABOUT YOUR PHONE Conventions Using Your Norstar Phone with the 3300 CITELlink Gateway TIPS FOR YOUR COMFORT AND SAFETY Don't cradle the handset! Protect your hearing 2 2 2 2 2 3 CUSTOMIZING YOUR PHONE Ringer Control Handset Receiver Volume Control Speaker Volume Control Display Contrast Control Language Change 3 3 3 3 4 4 MAKING AND ANSWERING CALLS Make a call Answer a call Redial Redial - Saved Number Speed Call - Personal On-Hook Dialing 4 4 4 4 5 5 -i-
PAGE 4
5 CALL HANDLING Temporary Hold Transfer Conference Conference Split Call Forward Call Forward - Remote Call Forward - End Chaining Call Forward - Override Messaging - Advisory Messaging - Callback Messaging - Cancel Callback Messaging - Cancel All Callbacks 5 6 6 6 7 8 8 9 9 9 10 10 10 USING ADVANCED FEATURES Account Codes Call Park Call Pickup Campon Do Not Disturb Override Paging Direct Paging Group Paging / Meet Me Answer Trunk Flash Tag Call -ii- 10 11 11 11 12 12 12 13 14 14 15
PAGE 5
ABOUT YOUR PHONE The Mitel Networks 3300 CITELlink Gateway allows your Nortel Networks™ Norstar phone to work on a Mitel Networks 3300 Integrated Communications Platform (3300 ICP). When used with a 3300 ICP, your T7100 phone has six fixed-function keys ( (SUPERKEY), (TRANS/CONF), (CANCEL), DOWN ARROW, , ). Your phone also features display-assisted selection of features, on-hook dialing, and an incoming call indicator light (above display).
PAGE 6
Conventions The following conventions are used in this user guide: z z Fixed-function keys are identified by bold uppercase letters (for example, TRANS/CONF ). Text that appears on the display is identified by double quotes (for example, "Language?"). Using Your Norstar Phone with the 3300 CITELlink Gateway Please note the following differences in the way your phone now operates: z z z Although there is no HOLD key, you can still place a call on temporary hold.
PAGE 7
CUSTOMIZING YOUR PHONE Ringer Control To adjust the Ringer Volume while the phone is ringing: z Press or . To adjust the Ringer Pitch while the phone is idle: 1. 2. 3. 4. Press . Press # (No) until "Ringer Adjust?" appears. Press * (Yes). To adjust the ringer pitch, press * (Yes). To adjust the ringer volume, press # (No), then * (Yes). 5. Press or until you hear the desired pitch/volume. 6. Press # (Save). 7. Press .
PAGE 8
Language Change To change the display language: 1. 2. 3. 4. 5. 6. Press Press Press Press Press Press . # (No) until "Language?" appears. * (Yes). * (Change). # (No) until the desired language appears. * (Yes). MAKING AND ANSWERING CALLS Make a call 1. Lift the handset. 2. Dial the number. Answer a call z Lift the handset. Redial To redial the last number that you manually dialed: 1. Lift the handset. 2. Dial *01 Redial - Saved Number To save the last number that you manually dialed: 1.
PAGE 9
Speed Call - Personal Note: Personal Speed Call lists must be configured by the Administrator. To store a personal Speed Call number: 1. 2. 3. 4. 5. Lift the handset. Dial 67. Enter an index number between 00 and 09. Dial the number to be stored. Hang up. To dial a stored personal Speed Call number: 1. Lift the handset. 2. Dial 58. 3. Enter an index number between 00 and 09. On-Hook Dialing To dial without lifting the handset: 1. If you want to use a Non-Prime Line, press a Line Appearance key. 2.
PAGE 10
Transfer To Transfer an active call: 1. Press . 2. Dial the number of the third party. 3. Do one of the following: To complete the Transfer, hang up. To announce the Transfer, wait for an answer, consult, and hang up. To cancel the Transfer, press . Conference To form a Conference when a two-party call is already in place, or to add another party to an existing Conference: 1. 2. 3. 4. Press . Dial the number of the next party. Wait for an answer. Press . To leave a Conference: z Hang up.
PAGE 11
Call Forward Call Forward lets you redirect incoming calls to an alternate number. Always redirects all incoming calls regardless of the state of your phone. B-Int redirects internal calls when your phone is busy, and B-Ext redirects external calls when your phone is busy. NA-Int redirects internal calls after several rings if you don't answer, and NA-Ext redirects external calls after several rings if you don't answer. Note: For information about "I Am Here?", see Call Forward - Remote.
PAGE 12
Call Forward - Remote To forward calls from a remote station to your current location: 1. 2. 3. 4. 5. 6. 7. Press . Press # (No) until "Call Forwarding?" appears. Press * (Yes). Press # (Next) until "I Am Here" appears. Press * (Yes). Dial the extension of the remote station. Press DOWN ARROW to save. To cancel Call Forward - Remote from the station that set the remote forwarding: 1. 2. 3. 4. Lift the handset. Dial **77. Dial the extension of the remote station. Hang up.
PAGE 13
Call Forward - Override To override Call Forward and ring a station: 1. Lift the handset. 2. Dial *1*. 3. Dial the extension number. Messaging - Advisory To turn Messaging - Advisory on: 1. 2. 3. 4. 5. Press Press Press Press Press . # (No) until "Advisory Msgs?" appears. * (Yes). # (Next) until the desired message appears. # (TurnOn). To turn Messaging - Advisory off: 1. 2. 3. 4. Press . Press # (No) until "Advisory Msgs?" appears. Press * (Yes). Press # (TurnOff).
PAGE 14
Messaging - Cancel Callback To cancel a Callback: 1. 2. 3. 4. Lift the handset. Dial *1#. Dial the number of the called station. Hang up. Messaging - Cancel All Callbacks To cancel all Callbacks: 1. Lift the handset. 2. Dial #1. 3. Hang up. USING ADVANCED FEATURES Account Codes To use Forced Account Codes: 1. Lift the handset. 2. Dial the Account Code digits. 3. Press #. To enter an Account Code during a call: 1. 2. 3. 4. 5. Press . Press **3. Dial the Account Code digits. Press # (Save). Press .
PAGE 15
Call Park To retrieve a call parked by the attendant: 1. Lift the handset. 2. Dial *23. 3. Dial the console ID and the Hold Slot number. Call Pickup To answer a call that is ringing at another station in your Pickup Group: 1. Lift the handset. 2. Press *6. To answer a call that is ringing at a station not in your Pickup Group: 1. Lift the handset. 2. Dial **6. 3. Dial the number of the ringing station. Campon To Campon to a busy station: z Dial 3 or wait for the time-out period to expire.
PAGE 16
Do Not Disturb To activate or deactivate Do Not Disturb: 1. Lift the handset. 2. To activate Do Not Disturb, dial *5. -OR3. To deactivate Do Not Disturb, dial #5. 4. Hang up. To activate Do Not Disturb from a remote station: 1. 2. 3. 4. Lift handset. Dial **5. Dial the number of the station to which Do Not Disturb is to apply. Hang up. To deactivate Do Not Disturb from a remote station: 1. 2. 3. 4. Lift handset. Dial ##5. Dial the number of the station with Do Not Disturb activated. Hang up.
PAGE 17
Direct Paging Direct Paging allows you to page a party through their phone speaker. If the paged party has Off-Hook Voice Announce enabled, the page will be heard even when the party is on a handset call. To page a party: 1. 2. 3. 4. Lift the handset. Press the *37. Dial the extension number. Speak to the dialed party after the tone. To answer a Direct Page (indicated by a single burst of tone): z Lift the handset.
PAGE 18
Group Paging / Meet Me Answer Group Paging allows you to page a group of telephones through their built-in speakers. You can belong to as many as three paging groups with one group designated as your "prime" group. When you need to respond to a Group Page but don't know the identity or extension number of the paging party, use the Meet Me Answer feature. You have up to 15 minutes after receiving the page to use Meet Me Answer. To make a Group Page: 1. Lift the handset. 2. Dial *37. 3.
PAGE 19
Tag Call Tag Call allows you to "tag" any threatening call that you receive. Using this tag, your system administrator can identify the source of the malicious call and provide this information to appropriate personel or authorities. You can only tag calls during an active two-party call. Note: Tagging a call unecessarily may result in fines or other penalties. To tag a malicious call: 1. Press TRANS/CONF. 2. Dial *55.