Technical information

Technician’s Handbook
26
Checking a System for Alarms
1. Log onto the maintenance terminal and select Maintenance mode.
The Maintenance screen displays the version of system software and
the system alarm status.
2. Select the following commands:
REPORTS
SHOW ALARMS (DEVICE_TYPE or ALL)
or
REPORTS
SHOW STATUS (Bay/Slot/Circuit or SWID or Ext_Num or ALL)
SHOW ALARMS displays alarms by device type (or all)
SHOW STATUS displays status by Bay/Slot/Circuit (PLID) or SWID
or Ext_Num or ALL or Logs Read All
Checking a System for Database Errors
1. Access CDE.
2. Select Form 01.
3. Select VERIFY DATA.
Refer to Logging In (page 245) for instructions on how to log into
a maintenance terminal.