Technical information

Programming
163
51 Final Ring Time-out (1 - 30 Minutes)
52 Minimum Flash Timer (20 - 50 ms; in 10 ms increments)
53 Maximum Flash Timer (20 - 150 ms; in 10 ms incr)
54 DISA Answer Timer (1 - 8 Seconds)
55 Account Code Length (Variable or 4 - 12 Digits)
56 Auto Room Status Conversion / Wakeup Print Timer
57 Vacant / Reserved Room Default Call Restriction
58 Occupied Room Default Call Restriction
59 Receivers Reserved for Non-Auto-Attendant Use
60
Tone Plan
Changing this value will cause a system reset
61 CLASS Receivers in SPINE Bay #1 (0..5)
62 CLASS Receivers in SPINE Bay #2 (0..5)
63 CLASS Receivers in SPINE Bay #3 (0..5)
64 CLASS Receivers in SPINE Bay #4 (0..5)
65 CLASS Receivers in SPINE Bay #5 (0..5)
66 CLASS Receivers in SPINE Bay #6 (0..5)
67 CLASS Receivers in SPINE Bay #7 (0..5)
68
DSP DTMF Receiver Channels (0...7) default = 7
Changing this value will cause a system reset
69 DTMF ON Timer (5-15 in 10 ms increments) default = 9 (90 ms)
70 DTMF OFF Timer (5-15 in 10 ms increments) default = 9 (90 ms)
71
Slot 10 FIM/CIM Capacity (2 or 3 Bays)
Changing this value will cause a system reset
72
Slot 11 FIM/CIM Capacity (2 or 3 Bays)
Changing this value will cause a system reset
73 Advance to Daylight Savings Time (mm:dd:hh)
76 Go Back to Standard Time (mm:dd:hh)
79 Daylight - Standard Time Difference (30 to 240 minutes)
80 MyAdministrator Access
Table 24: LIGHTWARE 19 Release 2.0 and greater
System Options and Timers (continued)
Option #
System Option / System Timer Name
(Sheet 3 of 5)