Technical information

Programming
133
 COS Option 502 - Display ANI/DNIS Information = ENABLE /
DISABLE
 COS Option 613 - Display ANI Information Only = ENABLE /
DISABLE
 COS Option 503 - Display CLASS Name if required.
4. To display ANI and DNIS digits on a console when talking to an
ANI/DNIS trunk, enable COS Option 502 - Display ANI/DNIS
Information for the console.
Intercept reason (FROM xxx DND) and Forwarding Information (FWD
FROM xxxx) take priority over DNIS.
Tenant Name and Calling Line ID take priority over ANI information
(immediately following the word TRUNK).
COS Option 613 - Display ANI Information Only does not apply to a
console.
The following tables identify displays during each call state according to
digits sent by the trunk and COS options selected for the display set.
If a name is received on the incoming trunk in the scenario
where you would see the DNIS in the ringing state, you will see
the ANI instead.
Table 19: ANI/DNIS Digits on Phone Display
(COS Option 502 Enabled and COS Option 613 Disabled)
COS Option 502- Display ANI/DNIS = YES (enable)
COS Option 613 - Display ANI only = NO (disable)
Phone display during
ringing
Phone display after
answer
ANI and DNIS sent DNIS ANI
ANI sent ANI ANI
DNIS sent DNIS DNIS
Neither sent Trunk Number or Label Trunk Number or Label