Technical information

Technician’s Handbook
112
Programming a Printer Port
System Printer Port
1. Form 34, Directed I/O
 Program the printer port in Form 34.
 Define Printout Types that are to be delivered to the system
printer port.
 Remove printer port for print types not used.
 Speed of printer port is programmed in Maintenance.
Dataset Printer Port
1. Form 11, Data Circuit Descriptor
 Define a circuit descriptor to match characteristics of device type.
Refer to Form 04, System Options and Timers for typical circuit
descriptor.
2. Form 12, Dataset Assignment
 Assign type of data device for the dataset PLID.
DSCONSConsole (output only, maximum 2400 baud)
1101MMiLINK
®
Dataset
1103/2103Standalone dataset
 Assign a Tenant, Extension number, COS, COR, and circuit
descriptor number.
3. Form 34, Directed IO
 Define printout type to be delivered to defined dataset.
Printer ports only work on main control cabinets, not on
peripheral cabinets.