Technical information

Technician’s Handbook
98
WARNING: Startup
incomplete after 1800
The DHCP server is
not functioning prop-
erly.
1. If you're not using a
Mitel DHCP server,
disconnect all DHCP
servers
OR
Disconnect the IP
Node from the subnet.
2. In the serial port
window on the PC,
type RetrieveDhcpDe-
faults.
3. Type Reboot and
press Enter.
Allow the IP Node to
reboot.
If the IP Node is still
not working:
1. Reboot the IP
Node.
2. Stop at Autoboot.
3. At the [VxWorks
Boot] prompt, type c.
4. Check all settings.
Table 15: SX-200 IP Node Troubleshooting Table (continued)
Indication Possible Causes Action
(Sheet 2 of 6)