Specifications

Platform Requirements

• Lotus Notes/Domino 5.09a

For the OPS Manager client, one of the following browsers is required:

• Microsoft Internet Explorer 5.01 (for managing SX-2000 systems only)

• Microsoft Internet Explorer 6.0 or 5.5 with Service Pack 2 (for managing SX-2000 and

3300 ICP systems)

• Netscape Communicator 4.79 or 6.2 or later (for managing SX-2000 systems only).

See Table 3, Supported software versions (p. 89).

Recommendations

Due to the limited HTTP connections, it is recommended that a maximum of two remote

OPS Clients be launched concurrently.

Server platform hardware (minimums)

• Pentium

266 MHz

• 256 MB RAM

• 2 GB SCSI hard drive

• 1 GB free disk space on c: drive

• 3.5 inch floppy drive

• CD-ROM drive (4x or better)

• 10 Mbs Ethernet interface

• 2 serial ports (expansion to 4 ports to support alarm pagers, UPS connection, or VT100

maintenance terminal access; Blue Heat serial port expander card with driver release

1.0.0.1 or later is recommended)

• parallel port or USB port (for connection of SAM module)

• Uninterruptible power supply recommended (not provided with the integrated platform)

• Color monitor; 17 inch monitor supporting resolution of 1024 x 768 (not provided with

the integrated platform)

• DAT Drive (optional for OPS Manager database backups).

Tip: The hardware must conform to Microsoft Hardware Compatibility Level (HCL) standards

(see www.microsoft.com/ntworkstation/info/hcl.htm):

Note: 512 MB RAM is recommended for performing a large amount of MAC operations.