Specifications

OPS Manager nstallation and Maintenance Guide
78
Correcting OPS Manager database errors
To restore backed up OPS Manager data to the OPS Manager database
1. Access the OPS Manager application.
2. On the Utilities menu, point to Restore and then click OPS Manager Data.
The Restore - OPS Manager Data window opens.
3. In the Restore window, move the pointer to the Restore from list and select Floppy or
Hard Disk as the backup medium from the menu.
4. Click Restore.
The OPS Manager station displays a dialog box that requests you to load the first
volume of the data to be restored.
5. Load the floppy into the drive. Wait until the drive is idle. Then, click OK in the dialog box.
6. Use the selection lists in the Restore Selection window to select the parts of the
database to restore; otherwise, all selected items are restored.
7. Click OK to start the restoration. A warning dialog box is displayed:
8. Click OK in the warning dialog box.
The database and files are restored and a series of messages follow the progress of
the restoration. The reboot dialog box is displayed when all data has been restored
successfully.
9. Click OK in the reboot dialog box to reboot the OPS Manager server. The system is available
for use when the reboot is completed.
The next step commits to restore the database. The user cannot cancel the restore
once it has started. All applications stop during database restore and the OPS
Manager station reboots at the end of the process.