Specifications

OPS Manager Installation and Maintenance Guide
70
7. Route the file to LPR3’s print job queue by entering
PRINT ∗.MAINTENANCE.SESSION_LOG /PORT LPR3
The maintenance session window displays:
PrintSys Info: Queued Job 15 Port LPR3 File ∗.MAINTENANCE.SESSION_LOG
8. To view LPR3’s print job queue enter SHOW PRINT LPR3
The maintenance session window displays:
PrintSys Info: SHOW PRINT
-------------------------------------------------------------------------------------------------
PORT NAME TYPE BAUD JOBS ACTIVE JOB FILE NAME
LPR3 auxiliary 1200 1 15 15 ∗.MAINTENANCE.SESSION_LOG
----------------------------------------------------------------------------------------------------
To print the output, enter ENABLE PRINT
The maintenance port responds with the following message in the lower half of the
Maintenance Session Window:
Auxiliary port (LPR3) mode.
Returns to maintenance terminal mode when printing completed.
Strike <CTRL> c to abort printing and return to maintenance terminal mode.
"ENABLE PRINT /NONQUEUED" may be terminated only with <CTRL> c.
** WARNING ** Auxiliary port is unpredictable at baud rates above 2400.
9. All output to be printed is displayed in the upper half of the Maintenance Session
window. When all output to be printed has been received, it is routed to the specified
printer or file. The maintenance screen is refreshed and responds with:
PrintSys Info: Completed Job 15 Port LPR3 File *.MAINTENANCE.SESSION_LOG
10. From the Specific menu, click Capture off