Specifications

Routine Maintenance
69
PrintSys Info: SHOW PRINT
-------------------------------------------------------------------------------------------
PORT NAME TYPE BAUD JOBS ACTIVE JOB FILE NAME
LPR3 auxiliary 1200 1 6 6 *.FORMS.FP0001
----------------------------------------------------------------------------------------------------
6. Enter ENABLE PRINT to print the form.
The following message is displayed in the lower half of the maintenance session
window:
Auxiliary port (LPR3) mode.
Returns to maintenance terminal mode when printing has completed.
Strike<CTRL> c to abort printing and return to maintenance terminal mode.
"ENABLE PRINT /NONQUEUED" may be terminated only with <CTRL> c.
** WARNING ** Auxiliary port is unpredictable at baud rates above 2400.
7. The data that will be printed is displayed in the upper half of the maintenance session
window. After all the data is received, it is routed to the specified printer or file. The
maintenance window displays
FORMPRINT: Request completed normally.
8. From the Specific menu, click Capture off.
Printing session logs
To print session logs from an SX-2000 element
1. Access the desired Network Element’s maintenance port.
2. In the maintenance session window, log into maintenance mode.
3. From the Specific menu, click Capture on.
The Print Dialog Box<Subscript> appears. Select the printer (or file) to which the output
is to be printed and press the appropriate button. The dialog box disappears.
4. Enter SESSION START to enter the session logging facility and to start saving the
session logs:
The maintenance session window displays:
Session logging started, using file - *.MAINTENANCE.SESSION_LOG
5. Complete your session activities; all output is captured.
6. Enter SESSION END to exit from the session logging facility.
The maintenance session window displays
Session logging ended, closed file - ∗.MAINTENANCE.SESSION_LOG