Specifications

OPS Manager Installation and Maintenance Guide
62
Using the Mitel Service Recovery Manager
From the Mitel Services Recovery Manager application, you can
• Check the status of the service
• Set the refresh interval (how frequently the window information is updated)
• Install and remove Service Recovery Manager configuration files
• Guard and unguard services
• Start and stop the guardian
• Configure the guardian
• Start and stop individual services
• Start and stop all services together
• Change the start mode
Opening the Mitel Service Recovery Manager application
The Mitel Service Recovery Manager (SRM) application window lists the
• Services that are monitored by the Mitel SRM application
• State of each service (active, stopped, or starting)
• Process identifier (PID) for the services that the guardian is currently guarding
• Number of failures since the last time the guardian was started
• Start mode (automatic, manual, or disabled)
• Mode of the service dependency (dependent or independent)
To open the Mitel Service Recovery Manager application
1. Click Start and then click Windows Explorer.
2. Navigate to the following file:
C:/Program Files/Mitel/Shared/Bin/SRMWIN.exe
3. Double-click on SRMWIN.exe
The Service Recovery Manager window opens (see Figure 27). It lists the status of all
the Mitel services.
Tip: The progress of the guardian is displayed in the lower right corner of the window.
Tip: To update the information in the Mitel Service Recovery Manager application, click Refresh
on the Guardian menu.