Specifications

OPS Manager Installation and Maintenance Guide
38
3. Click Assign.
The Assign Port Dialog box opens.
4. Select VT100 or Pager.
5. Click OK.
6. Click Configure.
The Device Manager window opens.
- Expand Ports (COM & LPT).
- Double-click Communications Port (COM1).
- Click the Port Settings tab.
- Enter the required setting, or keep the default setting.
- Click OK.
- Close the Device Manager window.
- In the OPSManager Serial Port Assignment window, click OK.
Start an OPS Manager session
You can start the OPS Manager application from the OPS Manager server or from a client
station.
1. Open the browser.
2. In the Go to: field, enter the Uniform Resource Locator (URL) of the http server, and
press the Enter key.
For example, http://servername/ops/ where servername is the netbios name of the
OPS Manager server.
If you are not authorized to access the OPS Manager application, the User Name and
Password dialog box appears after several seconds. Enter your NT domain\user
name in the User Name field, or if your user account is local to the OPS Manager
server, enter your user name only. Enter your password, and click OK.
Note: The client station must have the minimum browser version. See Platform Requirements
(p. 87) for more information.
Note: You must have an accessible JAR (Java ARchive) file to complete this procedure.
Tip: Do not use “localhost” as the servername.