Specifications

Installation and Configuration
17
Program the FTP user account and password
You must program a user account and password for the FTP services. FTP is used to
transfer data between OPS Manager and the network element. For example, to perform a
data save or data restore from an OPS Manager, you must enter the account user name
and password for the FTP services.
Set up FTP and WWW user account and services (Windows NT)
Program the FTP user account to support FTP services
1. Click Start > Programs > Administrative Tools (Common), and then click User
Manager for Domains.
The FTP user name and password that you program for the FTP services on the
OPS Manager server must be identical to the FTP user name and password that
you program on the MCIIIe card of each managed SX-2000 and in the Controller
Registry Configuration form of each managed 3300 ICP. You assign an FTP user
name and password to an MCIIIe card with the IPCONFIG USERNAME and
IPCONFIG PASSWORD commands. You enter these commands from an
SX-2000 maintenance session. For 3300 ICPs, you configure the FTP user name
and password in the “OPSMgrFtpPassword" and "OPSMgrFtpUsername" fields, in
the Controller Registry Configuration form.
See "Set up FTP and WWW user account and services (Windows 2000)," p. 24, or "Set up
FTP and WWW user account and services (Windows XP Professional)," p. 30.
Note: The SX2000 file must allow mnms read/write/execute/modify properties to allow ftp
backups to proceed.