Specifications

Installation and Configuration
7
Introduction
This chapter provides instructions on how to
• Install an OPS Manager platform (integrated solution)
• Install OPS Manager software on an existing platform (software-only solution).
OPS Manager management configurations
OPS Manager provides network-wide administration and maintenance through standard
Ethernet to the following elements:
• Network of SX-2000 LIGHT systems
• Cluster of SX-2000 LIGHT systems
• SX-2000 LIGHT systems
• 3300 ICP systems
• 3300 ICP voice-mail-only systems
• Combination of single systems, networks, clusters, and gateways
The LAN connects to MCIIIe control cards that are installed in the main control planes of
the SX-2000 LIGHT PBXs. On 3300 ICP systems, the LAN connects to the standard
network interface card (NIC) in the server. Figure 1 shows an OPS Manager configuration.
Note that only the LAN connections and the WAN connections are shown.