User guide

PROGRAM
connected to the caller. You can continue
programming but you will not see the information
on the caller, nor be able to use the features
normally associated with your set. You can then
either press your prime line key or lift the handset,
and your telephone exits from the programming
mode. However, all the information you have
entered at that point is lost and you will have to
start from the beginning after hanging up.
If you are not using Auto-answer
l Press EXIT
your SUPERSET@ exits from programming mode.
After hanging up, you will have to press PROGRAM
again and start from the beginnning.
Note: If you are not using Auto-Answer and do
not press EXIT before answering the call,
your display will show the time and date,
and no prompts will be available to you for
call processing.
Call Handling Features 2-67