User guide

HANDSFREE OPERATION

communicate in only one direction at a time. If

both parties talk at once, the unit gives precedence

to the higher volume sound, so some of the

‘conversation will be lost. Therefore, in handsfree

operation, it is best to wait until the other party

pauses or stops talking before you begin to speak.

Sometimes when I use the set in handsfree mode, my

voice cannot be heard clearly by the other party. What am

I doing wrong?

For best operation, observe the following

guidelines:

Direct your voice toward the SUPERSET qTM set.

Otherwise, your voice may sound “hollow”, far

away or quiet to the listening party.

Speak at a reasonable distance (an arm’s

length) from the set. If you are farther away or

have a quiet voice, speak a little louder.

Reposition the set so that other sources of

noise, such as fans, typewriters, computers,

printers, radios or nearby conversations do not

compete with your voice.

Do not block the microphone, located at the

front edge of the set. Remove any obstacles

such as books, pads, or your hand, which may

block the sound, and thus reduce the sound

quality.

Sometimes I lose all or part of an incoming call. Why?

If the set is being used handsfree in a noisy room,

all or part of the incoming call may not be heard.

Try to lower the noise level of the room by

reducing competing sources of noise (fans, radios,

printers, etc.) A sound-absorbing environment will

also enhance sound quality. Rooms with bare hard

2-38

Call Handling Features