User guide

FEATURE DISPLAY AND SOFTKEYS

The indicators on both sides of the top half of the

display are used with the select feature key.

,ZT”Y *;mau

2:N0 OIST’B 5:ACC CODE

3:AUTO ANS mic on

Any time a prompt is displayed, you can select that

prompt by pressing the softkey below it. For

example, pressing

SEND MSG

lets you send a

message to another SUPERSET qTM set (see the

first diagram below). Prompts only appear when

they can be used. Nothing happens when you

press a softkey without a prompt being displayed

for that softkey.

The two diagrams below show examples of other

possible displays. By comparing these two

. examples, you can notice that the same softkey is

used for different features and that sometimes a

softkey has no effect.

2017 RINGING

1 1 1 SEND MS0 1 -NC: 1 RELEASE

This diagram illustrates the display when you have

a caller on Consultation Hold and are trying to

reach the user of extension 2017 and that he/she

has not yet answered. At this point, if you press

Overview

v-1