User guide

FEATURE DISPLAY AND SOFTKEYS
The Feature Display . . .
is the alphanumeric Liquid Crystal Display located
in the middle of your SUPERSET qTM set.
The upper portion displays instructions and
messages. Prompts appear in the lower portion of
the display. Prompts are feature names, words, and
symbols that guide you in using your SUPERSET 4
set. The diagram below shows the display when
the set is idle.
2~44
3-FEB-a7
PROGRAM
MSC
REOIAL
The six buttons below the Feature Display are
referred to as “softkevs”. Prompts appear above
the softkeys in the Feature Display.
Each softkey is used for more than one prompt, so
the prompts in the display change according to
what features you are allowed to use on your
SUPERSET 4 set at that particular time.
The diagram below shows . . .
all of the feature prompts that may be displayed on
your Feature Display.
Note: Depending on the way your SUPERSET@ was
programmed at installation time, some of
these prompts may not appear on your set.
l-10 Overview