User Guide

QUICK REFERENCE GUIDE
3
To play stereo music from two Mitel S720 Bluetooth Speakerphones:
1. Pair one of the speakerphones to the IP phone.
2. Pair your smartphone to the second speakerphone.
3. Link the two speakerphones by tapping the button on both
speakerphones.
Where to position
Small meeting room
Position the Mitel S720 Bluetooth Speakerphone in the center of the
table, up to 2m (6.5ft) from each participant. A single speakerphone
is ideal for up to six people.
Desk
When using the Mitel S720 Bluetooth Speakerphone at your desk, it
is recommended that you place the speakerphone into an upright
position using the table stand. This will better direct the audio towards
you.
Call handling
Moving call audio between the IP phone and the Mitel
S720 Bluetooth Speakerphone
To move call audio between the IP phone and the Mitel S720
Bluetooth Speakerphone:
1. Tap the button on the speakerphone to move the call audio
to the speakerphone after answering or making a call on the IP
phone.
2. Press the key or lift the handset on the IP phone to
move the call audio back to the IP phone.
Answering an incoming call directly on the Mitel S720
Bluetooth Speakerphone
To answer an incoming call directly on the Mitel S720 Bluetooth
Speakerphone:
• Tap the button on the speakerphone to answer an incoming
call directly while it is ringing.
Multiple call handling
• To put a current call on hold and answer an incoming call, tap
the button on the speakerphone.
• To switch between held call and an active call, tap the button
on the speakerphone.
• To reject an incoming call and continue with the current call, tap
the button on the speakerphone.
Note: If you want to avoid automatic power off which will
disconnect the link between the two speakerphones in a meeting
room, it is recommended that both speakerphones be permanently
powered. This can be achieved by plugging the USB cable of one
of the speakerphones to the USB port on the back of the IP phone
and plug the second speakerphone to a standard USB AC Adapter
(minimum 7 W).
Notes:
1. The two speakerphones must be within 2m (6.5ft) of each other
to link them.
2. The link between the two speakerphones consumes one active
Bluetooth connection on each speakerphone. Each
speakerphone can only support one additional active
connection. One will be consumed by the connection to your
desk phone and the other by the connection to your
smartphone. You will not be able to connect any other
Bluetooth devices to either speakerphone.
2m/6.5ft
Notes:
1. If you have paired and connected your smartphone to your
Mitel MiVoice 6930 or 6940 IP phone, your smartphone will
temporarily disconnect from the IP phone while you have a call
active on the Mitel S720 Bluetooth Speakerphone. The IP
phone will automatically reconnect your smartphone once the
call has been terminated.
2. If you have paired your smartphone to the speakerphone to
listen to music and have also paired it to the IP phone to use
its MobileLink features, then it is recommended that you
always answer incoming calls on the IP phone first and
then move the call audio to the speakerphone.
3. The key LED on the IP phone will remain unlit when
the call audio is presented on the speakerphone.