User guide

89
Appendix OpenPhone 27 with a MEM card
charge can cause the device to be-
come defective.
4. Slide the MEM card (with the
contact-surface facing down-
wards) under the half-moon-
holders (a) in the MEM card
compartment. Thereby ensure
that the bevelled edge of the
MEM card is to the bottom left.
5. Press the MEM card down until it
locks in with an audible sound.
6. Close the MEM card compart-
ment with the cover (slide the
cover notches into the case until
the cover complete covers the
MEM card).
7. Insert the batteries (see
page 11) and close the battery
compartment (see page 10).
Removing the MEM card
It is only necessary to remove the
MEM card if you pass on the handset
or if you need the MEM card for a
new handset.
After having removed the batteries:
1. Slide the MEM card cover in the
battery compartment in the ar-
row direction (OPEN). Softly
pivot the cover upwards.
2. With a pointed object press on
the release (b), see diagram op-
posite.
3. Take the MEM card out.
a
b
1
2