User guide

88
OpenPhone 27 with a MEM card Appendix
OpenPhone 27 with a MEM card
General Information
The OpenPhone 27 can be equipped
with a memory card (MEM card)
which is provided. The MEM card
stores the device’s local settings (in-
cluding a local telephone book with
100 entries) and the device’s identifi-
cation (IPEI). Therefore when ex-
changing the device it is possible to
have this information (via the MEM
card) on the other device, thus al-
lowing (without re-enrolment) im-
mediate telephony.
Operation with/without
MEM card
The OpenPhone 27 when commis-
sioning for the first time, without a
MEM card, is also fully operational
(without the above mentioned ad-
vantages). However, if you have in-
serted a MEM card (which also al-
ready adopted the telephone’s data),
then removing it causes the
OpenPhone 27 to become non-func-
tional until a programmed MEM card
is inserted.
Programmed MEM card means: A
MEM card that has been inserted in
another device or a MEM card that
has been especially prepared by the
Service (e.g. as replacement).
Inserting the MEM card
Safety Notice!
The MEM card must be handled with
a great deal of care. The contacts
must be free of dust, moisture, fat
etc. Do not store the MEM card in
warm areas (e.g. direct sunlight). Do
not bend the MEM card; the contacts
can be broken.
The MEM card is inserted in the bat-
tery compartment under the batter-
ies.
1. Using your finger, first remove
the small MEM card from the
larger frame.
2. Open the battery compartment
(see page 10) and remove the
batteries (if these have already
been inserted).
3. Slide the MEM card cover in the
battery compartment in the ar-
row direction (OPEN). Softly
pivot the cover upwards.
Note: Never touch the now visible
shiny gold contacts! Static dis-