User guide

86
Removing the Driver USB Connection
The option Prevent access from the
Internet on … Internet under the
menu NET Configuration: Safe Ac-
cess must be deactivated.
A connection must be configured in
the dial-up network which has the
same internal telephone number as
the RAS interface. The settings are
identical to those for the Internet
dial-up connection.
In the connection details window,
the same user name and same pass-
word must be entered as configured
in the OpenCom User Manager.
When this has been successfully
completed, the symbol for an active
dial-up connection will appear in the
status line next to the time. In the
display of the OpenPhone 27 you
will see the words Data connection.
Removing the Driver
If at a later date you wish to remove
the driver software from your PC,
please proceed as follows:
1. End driver operation by clicking
on the LED symbol on the right
hand side of the taskbar with
the right-hand mouse button.
You will possibly have to end
other active data applications.
Now open the control panel (via
Start: Settings). Double-click on
Software.
2. In the list of installed software,
you will see OpenPhone 27.
Mark this entry and click on the
Add/remove… button.
3. Follow the instructions. If a de-
installation is necessary, click on
the corresponding symbol. In or-
der to remove the software,
press the right-hand mouse but-
ton and select Finish in the con-
text menu. Please end all CAPI
applications.