User guide

83
USB Connection Internet Access
Setting up the
OpenPhone 27
First requirement is the configura-
tion of the OpenPhone 27 as type
“OpenPhone 27/28 + Data”. This can
be done in the OpenCom Configura-
tor under the menu option PBX Con-
figuration: Ports: DECT Phones.
The Telephone and Data options for
the handset can either have the
same number or two different inter-
nal numbers. In either case, the
number(s) must be assigned to a
user via the User Manager.
These settings apply for both the in-
ternet connection via the OpenCom
and via a PC.
When using different telephone
numbers for Telephone and Data, is
it imperative that both numbers be
assigned to users. If your Open-
Phone 27 handset is registered as
Data, then a PC symbol will appear
on the display of the handset.