User guide

80
Installing the Software USB Connection
3. First install the driver software
for your OpenPhone 27. Move
the mouse to the text called
Install OpenPhone 27
Software, which will then be
highlighted, and press the left-
hand mouse button. From the
shown options, select the CAPI
driver installation that corre-
sponds to your hardware config-
uration.
The installation program will
then start. Please follow the in-
structions on the screen. After
the welcome screen, the licence
agreement and possibly a mes-
sage concerning existing ISDN
installations, you will come to
the path selection. If you would
prefer a different target folder,
click on Change and select a
suitable folder.
After exiting this screen by click-
ing on Next, you reach the in-
stallation-type screen. Only ex-
perienced users should activate
the Custom option; it allows you
to decide exactly which compo-
nents should be installed. Click
on Next to proceed.
In the port selection which fol-
lows Search port
(recommended) click on Next.
In the next screen you will see
information about the software
to be installed. Start the installa-
tion procedure with Install.
If the installation procedure es-
tablishes that files on your PC
are newer than those on the CD,
a corresponding message screen
opens. Please retain the most re-
cent files.
4. To complete the installation you
must restart your PC. If you have
not modified the default values,
then in your start menu, under
“Programs”, there should be a
folder “OpenCom” which in turn
contains a folder “OpenPhone
27”. In this folder you will have
the “CAPI-Control” entry.