User guide

75
Features and Menus The Menus
Appointments: This menu item is
only available if you have at least
one active appointment (refer to the
section entitled “Appointments” on
page 62).
Charges: You see the charges for the
last call and the total call charges for
your telephone.
Active features: You can access the
Active Features menu (see next
chapter) using this menu item.
Note: In order to be able to use
the Info key, your OpenCom 100
communications systems must be
using a software version of at least
5.22.
“Active features” Menu
This menu gives you an overview of
the active features that restrict your
availability. The same menu items
can also be found in the main menu.
You can deactivate features directly,
thereby removing them from this
menu.
Press and hold the Info key
B
or select Active features in the Info
menu. Then select …
Call protect.: This menu item is only
available if the Call protection fea-
ture is active. You can use this menu
item to deactivate call protection
again (see also the section entitled
“Call protection” on page 69).
Call diversion: This menu item is
only available if you have activated
call diversion. You can use this menu
item to re-programme call diversion
(see also the section entitled “Call
diversion” on page 60).
Hunt group: If your device belongs
to one or more hunt groups, a list of
corresponding hunt groups will be
displayed. You can now disconnect
from or connect to hunt groups (see
also the section entitled “Hunt
group” on page 59).
Time control: This menu item is only
displayed if you are authorised to
edit the OpenCom 100 time control.
It allows you to select a time group
or activate automatic time control
(see also “Time control” on page 73).
Telephone lock: This menu item is
only available if you have activated
the telephone lock. You can deacti-
vate the telephone lock after enter-
ing the PIN (see also the section en-
titled “telephone lock” on page 69).
Note: In order to be able to use
the Info key, your OpenCom 100
communications systems must be
using a software version of at least
5.22.