User guide

60
The Menus Features and Menus
Configuring call forwarding
First select Call forwarding and
then …
Call diversion: Select Immediately,
After delay or Busy for the forward-
ing mode. Then key in the call for-
warding destination (please refer to
the chapter entitled Making Exter-
nal/Internal Calls starting on
page 32). Then select whether inter-
nal calls, external calls or all calls
should be forwarded to the destina-
tion number. Activate call
forwarding with on. Active call for-
warding is indicated by a “+” sign.
This is followed by the call forward-
ing destination.
Note: All calls for the telephone
numbers of your telephone are for-
warded (with the exception of hunt
group numbers). If a number is
stored on more than one telephone,
then calls made to any of the other
telephones will be forwarded as
well.
Divert MSN: “Divert MSN” is availa-
ble for ISDN multi-terminal accesses.
For each MSN you can use this form
of call forwarding to forward incom-
ing external calls to external desti-
nations. Several MSNs can be
grouped together (this is configured
by the system administrator) and
forwarded to a common destination
number.
The display indicates a list of the
configured MSNs and MSN groups.
Select an entry. Then select
Immediately, After delay or Busy
for the forwarding mode. Then key
in the external destination number
and activate the function. Active call
forwarding is indicated by a “+”
sign. This is followed by the call for-
warding destination. A “?” preceding
the entry, ?MSNGroup1 for exam-
ple, means that call forwarding is ac-
tive for some MSNs or that there are
different call forwardings activated
for this group.
Note: For this type of call forward-
ing, the (external) destination
number is always entered without
the trunk line seizure code digit. If
“Divert MSN” is executed in the ex-
change (= external call forwarding,
configured by the system adminis-
trator), it can take a few seconds af-
ter configuration for call forwarding
to be activated in the exchange.
Divert door: With this type of call
forwarding, all calls signalled by the
doorbell are forwarded. If several
doorbells are configured on the
communications system, first select
the doorbell whose calls are to be di-
verted. How many door bells are
available and with which names
they are listed in the menu, depends
on the type of entrance intercom.
Consult your system administrator if
you have questions concerning the
configuration of the door bells. Then
key in the call forwarding destina-
tion (please refer to the chapter enti-
tled Making External/Internal Calls