User guide

48
Special Calls/Conversations Telephoning
Doorbell, Door Opener
... opening the door while the
telephone is in the idle state
Press the
A key.
To open the door, select the Door
opener menu item in the menu dis-
played.
… opening the door during a call
If the doorbell signal is triggered
during a call, you will hear the dis-
creet call-waiting tone.
To open the door, select the Door
opener menu item in the menu dis-
played.
Note: The Door opener menu
item is not dependent on an en-
trance intercom call. The door
opener function controls a relay
contact in your system which can
also be connected to other devices.
Consult your system administrator
for further details.
Entrance Intercom Calls
Calling the Entrance Intercom
If your system is connected to an
entrance intercom, you can use it as
follows to speak with visitors:
A*101
In an enquiry call:
GR*101
If you are operating a “DoorLine”
entrance intercom, use the following
code procedure:
A*102
In an enquiry call:
GR*102
Signal when the telephone is in
the idle state
Press the
A key. You can speak with
the visitor.
Signal during a call
If the doorbell signal is triggered
during a call, you hear a call-waiting
tone. Proceed as described in the
section entitled Calls During a Con-
versation starting on page 41.
Door Call Forwarding
You can forward calls signalled from
the doorbell to another (internal or
external) call number, a so-called
“pharmacy line”. This is done by
means of the following code-
number procedure (or via the Call
forwarding menu; see the section