User guide

42
Accepting Calls Telephoning
“Call” Menu
You receive an incoming call in the
idle state. Press the
Menu softkey
briefly and then select …
Reject call: You reject the waiting
call by pressing the
OK softkey. The
caller hears the busy tone.
Deflect call: You do not accept the
call yourself, but deflect it to another
subscriber. Enter the destination
number and confirm this with
OK .
You can only use the “Deflect call”
function if your user group is author-
ised to forward calls to internal and/
or external destinations.
Door opener:* This function
activates the door opener. (This
menu item is only displayed if you
have been given the corresponding
user authorisation.)
“Call-Waiting” Menu
You receive an incoming call in the
call state. Press the
Menu softkey
briefly and then select …
Hands-free on or Hands-free off:
Here you can activate/deactivate the
hands-free functionality. This menu
point is only displayed with an
OpenPhone 27.
Disconnect: You disconnect the cur-
rent call and accept the waiting call.
Phone book: You can add the first
party’s phone number to the
OpenCom 100 telephone book as a
new entry (New Entry) or you can
add it to an existing entry (Add).
Please see: Add Phone Numbers to
Phone Book from Lists or During a Call
starting on page 52.
Park call:* You park the first call.
Then press the
A key to enable your
phone to accept new calls. The sec-
ond (waiting) call will then be sig-
nalled like a normal call; you can ac-
cept it by pressing the
A key. After
you have finished this call you can
unpark the parked call by briefly
pressing the
Menu softkey.
Reject: You reject the waiting call by
pressing the
OK softkey. The caller
hears the busy tone.
Accept: You accept the waiting call
by pressing the
OK softkey. The cur-
rent call is held.
Deflect: You do not accept the call
yourself, but deflect it to another
subscriber. Enter the destination
number and confirm this with
OK .
You can only use the “Deflect call”
function if your user group is author-
ised to forward calls to internal and/
or external destinations.
Door opener:* This function acti-
vates the door opener. (This menu
item is only displayed if you have
been given the corresponding user
authorisation.)