Specifications

General Information Guide
- 69 -
Feature Name: Description:
idle stations, and the stations stop ringing when one member
answers the call.
Handset Receiver Volume
Control
Handset Receiver Volume Control lets you adjust the volume of the
handset receiver.
Handsfree Operation Handsfree Operation lets you use your telephone without lifting the
handset.
HCI®/CTI™ Advanced
Telephony
Allows monitoring of the activity and state transitions of extensions.
HCI/CTI Basic Telephony
Permits a host computer application to initiate and clear calls on
behalf of an extension on the system through X.409, X.410, and
X.25 protocols.
Headset Operation Headset Operation lets you use a Headset to make and receive
telephone calls.
Hold Hold lets you temporarily suspend a telephone call. While the call
is on Hold, you can use the other telephone features. The call can
be either retrieved at the originating telephone or another
telephone.
Hold on Hold
This feature allows both parties of a two-party call to put the call on
Hold.
Hotel/Motel Provides features commonly used by hotels, motels, hospitals, as
well as a Property Management Interface.
Hotline
Hotline limits your access to a designated answer point. The
system automatically dials the answer point when you go off-hook.
The designated answer point can be another station, an attendant,
a trunk, or a hunt group.
Hunt Groups Hunt Groups let you dial a pilot number and have the call
completed to the first idle station in a group of stations. Any station
within a Hunt Group may be accessed directly by dialing the station
number.
Intercept Handling Intercept Handling lets the system control what happens to a call
when the call cannot be completed to the required destination. A
call may be routed to a tone or to a directory number. Two
alternate destinations may be programmed for each condition.
Interconnect Restrictions Each peripheral device is assigned an Interconnect Number that is
used to restrict one device from connecting with another.
Interconnect Restrictions can be used to restrict access to certain
trunks, stations, or equipment (i.e. data communications
equipment). The restriction is also a function of the direction of the
call.
IP Networking IP Networking allows calls to be placed or received over an IP
trunk originating from either an IP endpoint or a non-IP endpoint.
Key System Groups See Groups - Key System and Multicall.
Language Change
Language Change lets you change the language of the telephone
softkeys and prompts to any one of the following languages:
English, French, Italian, German, Spanish, or Dutch.
Line Types and Appearances Line appearance keys are single or shared lines that appear on the
telephone programmable keys. There are three types of lines:
Prime, Non-Prime, and No Where Prime.
Line Appearance Ring Types Each line appearances can be programmed to ring in a different
manner.